Відео

Hall Anthony Young Linda Young Linda

thank you!!

Brice is so sweet and such a great help💕

Robinson Donna Martinez Ronald Rodriguez Thomas

2024, can we get a update on how the fence is doing?

Than you my broder

Thank you

I'm planning to install a 30' X 8' fence. Can I use line posts at the end of a run instead of end posts. I don't care if the channels shows at the end. The reason why I am considering doing this, is that I might want to add additional panels later on. .

Thanks for this video, saved me a call to Rainbird. I pulled the Mod 1 out and plugged it back in and it worked. We had a momentary power outage, that might have knocked it out. It was 97 degrees here today, my lawn thanks you too.

Wow, this isn't vinyl. This is composite as of 2024. It will hold up better than vinyl.

Thanks. I started by resetting the module and that worked. Also found out I've never had a backup battery.

Just set mine up using your video, which is infinitely easier to follow and much more accurate than the manual. Thanks for posting!

Thank you. I was getting stressed until I found your video. I know what to do now.

Thanks so much! Just got the same code and now l know how to fix it! And how to replace the battery!

Hello Chris, I’m getting the same code “No Mod 1” on the exact same panel, however when I moved the module over to the next position it still read No Mod 1, ?

Ah! Thank you so much!!! I live in a booming community, and the sprinkler businesses are too busy to help with a little thing like this. It’s gettin’ hot here too, and I can’t get behind on the watering.

Chicken looks good! 🍗😍Love your grill, what make is it?

Chargrillers are awesome. We sell the acorns in the bbq shop where I work

I've been charcoal grilling my entire life. I don't use lump charcoal, but do use wood chips to put on top of my briquettes to help give my food a smokey taste.

I had three gas grills rust out in 6 years, switched to a 22 inch charcoal Weber grill, zero issues in a decade. And never ran out of propane mid-cooking.

Hank Hill does not approve

Thanks. I hit the resent button and the mod 1 code went away and sprinklers worked. You saved me from paying the lawn guy.

$209 at Costco now. 😑

Thank you!! I have the exact same problem and will try the hair dryer

Simtek Ecostone fence 12 years later! These gate post in my experience (Three 6 foot gates and two 4 foot gates) do NOT sag or bend. The gate post especially needs extra concrete and solid substrate or ground for the hole. The post in the original video looked like it leaned in the hole and did not bend. Did you put a straight edge on the post... Over 250 feet of Ecostone panels and 5 gates for over 10 years, no issues other than having to use the hinge adjustments one time about a year after the gates were set.

Gate posts ARE plenty heavy and strong. It appears as though the gate post leaned over time rather than bent. I used 5-6 bags (Minimum) for each gate post and even at the substrate or ground around the post matters equally. When I did my gate posts I anticipated some change from the gates so instinctively set them 1/4 bubble "out of plumb" away from the gates. They are all plumb and I only adjusted each gate one time in over 10 years. I also run a string line on the top line of each post when setting them. This assures that every panel is the exact same height.

Reply Back I will give you $20.00 for the metal shed

What's the name or part number of the bulb

🇺🇦👍

I love these toro trimmers. I got 2, one is lightly used over 10 years old. The other is pretty heavily used for the past 5-6 years. Not high rpms but pretty good torque. I use mine with a bump head, a brush cutter and those plastic brush cutters with metal teeth. I originally bought my heavily used one as a emergency back up, wasn’t expecting it to last this long.

Is the line with the tank filter connected to the bigger port or the smaller port on the bulb?

Thank you so much for this video! Clear and concise. Pulling module out and putting it back in worked for me.

Thanks a ton.

Thanks Bryce :) You're awesome!

It worked thanks!

“It would kill itself pretty much” 1:24 😂😂

Just wanted to say thank you! Your video saved me an expensive service call. I could easily understand the steps. Got the replacement part and was able to easily do the work myself.

My gate came out looking perfect. Thanks for the video

Just got one 2nd hand, no tried yet. I hope it doesn't give me issues. 😂

Thank you so very much. Watching this vid made the bulb change out a breeze. 👍👍👍

I always had a bitch of a time with the filter housing drain plug!!! Makes sense that it would screw in😂😅

Night video

If y'all pokin round in unfinished attic with metal stick ..be sure to turn the power of from the circuit breaker ..also make sure that the reason the animal died wasn't due to him snacking on the electrical up there ...

Much appreciated and many thanks from Australia. Thought it was a was a long intro to find out the part to replace... until the reset button solved all.

Phantom power is what that 48v button is. That is for condenser mics

Simply a scam, it works very badly, I sold it and bought a Behringer

Thank you so much Chris!!! I was having the same problem with my sprinkler system but now I fixed it with your help!!!You’re the best 🙏🙏🙏

You actually don't need to take anything off except the cover. After you loosen the bulb the short tube stays in the hole. Just connect the long side first, the line up the short one in the hole..use screw driver to get clips started and push it in. Replace housing. Bingo.

Ever since a new Internet company moved in my town. I been having a Internet trouble where are my Wi-Fi router keeps on resetting itself. Every time they do something around my neighborhood, my router keep resetting itself. I haven’t had that problem until that company did something. First time the AT&T guy said that that company stretch the line way too tight in it made my router reset itself. And that Internet company drove by down my street and my router started reset itself. So I called ATT and they gave me a new wi-Fi router and the new router is reset itself. I think that certain Internet company line is messing with the signal of the AT&T.

Thanks